added vagrant build

.gitignore

@@ -14,3 +14,6 @@ scripts/galene/data/
 .vscode
 bin
 deleted
+*/venv*
+
+.vagrant

ansible/install_keepalived.yaml

@@ -0,0 +1,79 @@
+---
+- name: Install keepalived on 3-node cluster
+  hosts: vm1,vm2,vm3
+  become: true
+  become_user: root
+  serial: 1 # Ensure tasks are executed one host at a time
+
+  vars_files:
+    - vault.yml
+    - vars.yml
+
+  vars:
+    tailscale_host: "{{ hostvars[inventory_hostname]['tailscale_host'] }}"
+
+  tasks:
+    # - name: Debug gathered facts
+    #   ansible.builtin.debug:
+    #     var: ansible_facts
+
+    # - name: List all network interfaces and their IPs
+    #   ansible.builtin.debug:
+    #     msg: "{{ item.key }}: {{ item.value.ipv4 | map(attribute='address') | list }}"
+    #   with_dict: "{{ ansible_facts['network_interfaces'] }}"
+    #   when: ansible_facts['network_interfaces'] is defined
+
+    - name: Detect interface with the desired IP range
+      ansible.builtin.set_fact:
+        keepalived_interface: "{{ item.key }}"
+      with_dict: "{{ ansible_facts['network_interfaces'] }}"
+      when: item.value.ipv4 is defined and item.value.ipv4 | selectattr('address', 'search', '^192\\.168\\.56\\.') | list | length > 0
+      register: detected_interface
+
+    - name: Set detected interface fact
+      ansible.builtin.set_fact:
+        keepalived_interface: "{{ detected_interface.ansible_facts.keepalived_interface }}"
+      when: detected_interface is defined and detected_interface.ansible_facts is defined
+
+    - name: Fallback to default interface if no match is found
+      ansible.builtin.set_fact:
+        keepalived_interface: "enp0s8"
+      when: keepalived_interface is not defined
+
+    - name: Fail if no interface is detected even after fallback
+      ansible.builtin.fail:
+        msg: "No interface with the desired IP range was detected, and fallback to default interface failed."
+      when: keepalived_interface is not defined
+
+    - name: Install keepalived
+      ansible.builtin.apt:
+        name: keepalived
+        state: present
+
+    - name: Configure keepalived on each node with decremented priority
+      ansible.builtin.copy:
+        dest: /etc/keepalived/keepalived.conf
+        content: |
+          vrrp_instance VI_1 {
+            state MASTER
+            interface {{ keepalived_interface }}
+            virtual_router_id 51
+            priority {{ 100 - (groups['vms'].index(inventory_hostname)) }}
+            advert_int 1
+            authentication {
+              auth_type PASS
+              auth_pass mysecret
+            }
+            virtual_ipaddress {
+              192.168.56.250
+            }
+          }
+        owner: root
+        group: root
+        mode: "0644"
+
+    - name: Enable and restart keepalived service
+      ansible.builtin.systemd:
+        name: keepalived
+        enabled: true
+        state: restarted

ansible/requirements.txt

@@ -0,0 +1,36 @@
+ansible==10.2.0
+ansible-compat==24.10.0
+ansible-core==2.17.2
+ansible-lint==24.12.2
+attrs==24.3.0
+black==24.10.0
+bracex==2.5.post1
+certifi==2024.7.4
+cffi==1.16.0
+charset-normalizer==3.3.2
+click==8.1.8
+cryptography==43.0.0
+filelock==3.16.1
+idna==3.7
+importlib_metadata==8.5.0
+Jinja2==3.1.4
+jsonschema==4.23.0
+jsonschema-specifications==2024.10.1
+MarkupSafe==2.1.5
+mypy-extensions==1.0.0
+packaging==24.1
+pathspec==0.12.1
+platformdirs==4.3.6
+pycparser==2.22
+PyYAML==6.0.1
+referencing==0.35.1
+requests==2.32.3
+resolvelib==1.0.1
+rpds-py==0.22.3
+ruamel.yaml==0.18.10
+ruamel.yaml.clib==0.2.12
+subprocess-tee==0.4.2
+urllib3==2.2.2
+wcmatch==10.0
+yamllint==1.35.1
+zipp==3.21.0

pipelines/dev/vagrant-k3s.json

@@ -0,0 +1,11 @@
+[
+    {
+        "name": "pre-requisties",
+        "function": "RunCommand",
+        "params": [
+            "./scripts/vagrant_check_prerequisites.sh"
+        ],
+        "retryCount": 0,
+        "shouldAbort": true
+    }
+]

scripts/ansible_inventory.ini

@@ -0,0 +1,9 @@
+[all]
+vm1 ansible_host=127.0.0.1 ansible_port=2222 ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/vm1/virtualbox/private_key ansible_python_interpreter=/usr/bin/python3
+vm2 ansible_host=127.0.0.1 ansible_port=2200 ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/vm2/virtualbox/private_key ansible_python_interpreter=/usr/bin/python3
+vm3 ansible_host=127.0.0.1 ansible_port=2201 ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/vm3/virtualbox/private_key ansible_python_interpreter=/usr/bin/python3
+
+[vms]
+vm1
+vm2
+vm3

scripts/configure_vagrant_k3s.sh

@@ -20,6 +20,7 @@ SCRIPT_DIR="$(cd "$(dirname "${BASH_SOURCE[0]}")" && pwd)"
 echo "Script directory: $SCRIPT_DIR"
 
 VAGRANT_DIR="$SCRIPT_DIR/../vagrant/dev/ubuntu/"
+echo "Vagrant directory: $VAGRANT_DIR"
 
 cd "$VAGRANT_DIR" || {
     echo "Failed to change directory to Vagrant directory: $VAGRANT_DIR"
@@ -33,6 +34,7 @@ if [ -z "$(vagrant status | grep 'running')" ]; then
 fi
 
 network_info=()
+vagrant_ports=()
 
 echo "Gathering network information from running VMs..."
 running_vms=$(vagrant status | grep "running" | awk '{print $1}')
@@ -41,9 +43,8 @@ for vm in $running_vms; do
 
     # Check network interfaces
     vm_info=$(vagrant ssh "$vm" -c "ip -j addr" | jq -r '
-        .[] | 
-        "Interface: \(.ifname)\n" +    vm_info=$(vagrant ssh "$vm" -c "ip -j addr" | jq -r '
-
+        .[] |
+        "Interface: \(.ifname)\n" +
         (if .addr_info then
             (.addr_info | map("  IP (\(.family)): \(.local)") | join("\n"))
         else
@@ -66,6 +67,34 @@ done
 
 echo "Network information gathered successfully."
 
+
+# get vagrant ports
+echo "Gathering Vagrant port information..."
+# vagrant ssh-config | grep Port | while read -r line; do
+#     echo "Processing line: $line"
+
+#     # Processing line: Port 2222
+#     # Processing line: Port 2200
+#     # Processing line: Port 2201
+
+
+#     port=$(echo "$line" | awk '{print $2}')
+#     echo "Extracted port: $port"
+#     vagrant_ports+=("$port")
+# done
+
+
+while read -r line; do
+    echo "Processing line: $line"
+
+    # Extract the port number
+    port=$(echo "$line" | awk '{print $2}')
+    echo "Extracted port: $port"
+    vagrant_ports+=("$port")
+done < <(vagrant ssh-config | grep Port)
+
+
+
 # Print network information
 for info in "${network_info[@]}"; do
     echo "----------------------------------------"
@@ -73,5 +102,65 @@ for info in "${network_info[@]}"; do
     echo "----------------------------------------"
 done
 
+# Print Vagrant ports
+echo "Vagrant Ports:"
+for port in "${vagrant_ports[@]}"; do
+    echo "Port: $port"
+done
 
+# create an ansible inventory file
+# [all]
+# vm1 ansible_host=<vm1_ip> ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/vm1/virtualbox/private_key
+# vm2 ansible_host=<vm2_ip> ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/vm2/virtualbox/private_key
+# vm3 ansible_host=<vm3_ip> ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/vm3/virtualbox/private_key
+
+# echo "Creating Ansible inventory file..."
+# inventory_file="$SCRIPT_DIR/ansible_inventory.ini"
+# echo "[all]" > "$inventory_file"
+# i=0
+# for vm in $running_vms; do
+#     port="${vagrant_ports[$i]}"
+#     echo "$vm ansible_host=127.0.0.1 ansible_port=$port ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/$vm/virtualbox/private_key" >> "$inventory_file"
+#     ((i++))
+# done
+echo "Creating Ansible inventory file..."
+inventory_file="$SCRIPT_DIR/ansible_inventory.ini"
+echo "[all]" > "$inventory_file"
+i=0
+for vm in $running_vms; do
+    port="${vagrant_ports[$i]}"
+    echo "$vm ansible_host=127.0.0.1 ansible_port=$port ansible_user=vagrant ansible_ssh_private_key_file=.vagrant/machines/$vm/virtualbox/private_key ansible_python_interpreter=/usr/bin/python3" >> "$inventory_file"
+    ((i++))
+done
+
+echo "" >> "$inventory_file"
+# echo "[children]" >> "$inventory_file"
+# echo "vm_group" >> "$inventory_file"
+# echo "" >> "$inventory_file"
+echo "[vms]" >> "$inventory_file"
+for vm in $running_vms; do
+    echo $vm >> "$inventory_file"
+done
+
+echo "Ansible inventory file created at: $inventory_file"
+
+# source venv ansible 
+ANSIBLE_VENV_DIR="$SCRIPT_DIR/../ansible/venv"
+if [ -d "$ANSIBLE_VENV_DIR" ]; then
+    echo "Activating Ansible virtual environment..."
+    source "$ANSIBLE_VENV_DIR/bin/activate"
+else
+    echo "Ansible virtual environment not found at $ANSIBLE_VENV_DIR. Please create it before running this script."
+    exit 1
+fi
+
+ANSIBLE_HOST_KEY_CHECKING=False ansible --inventory-file ../../../scripts/ansible_inventory.ini -m ping all | cat
+
+# exit if error from ping
+if [ $? -ne 0 ]; then
+    echo "Ansible ping failed. Please check your Vagrant VMs and network configuration."
+    exit 1
+fi
+
+ANSIBLE_HOST_KEY_CHECKING=False ansible-playbook ../../../ansible/install_keepalived.yaml  --inventory-file ../../../scripts/ansible_inventory.ini  | cat
 

vagrant/dev/ubuntu/Vagrantfile

@@ -8,7 +8,7 @@
 Vagrant.configure("2") do |config|
   # VM 1 Configuration
   config.vm.define "vm1" do |vm1|
-    vm1.vm.box = "hashicorp/bionic64"
+    vm1.vm.box = "ubuntu/jammy64"
 
     # run ip link to list network interfaces on linux
     # run ipconfig to list network interfaces on Windows
@@ -33,7 +33,7 @@ Vagrant.configure("2") do |config|
 
     # Uncomment the following line to use a specific network interface for the public network
     # and replace "wlp0s20f3" with your actual network interface name.
-    # vm1.vm.network "public_network", bridge: "wlp0s20f3"
+    vm1.vm.network "public_network", bridge: "wlp0s20f3"
 
     vm1.vm.network "private_network", type: "dhcp"
 
@@ -44,13 +44,14 @@ Vagrant.configure("2") do |config|
 
     vm1.vm.provision "shell", inline: <<-SHELL
       sudo apt-get update
-      sudo apt-get install -y jq
+      sudo apt-get install -y software-properties-common python3-pip python3-apt jq
+      #  python3 -m pip install --upgrade pip
     SHELL
   end
 
   # VM 2 Configuration
   config.vm.define "vm2" do |vm2|
-    vm2.vm.box = "hashicorp/bionic64"
+    vm2.vm.box = "ubuntu/jammy64"
 
     # Private network for inter-VM communication using DHCP
     vm2.vm.network "private_network", type: "dhcp"
@@ -65,13 +66,14 @@ Vagrant.configure("2") do |config|
     
     vm2.vm.provision "shell", inline: <<-SHELL
       sudo apt-get update
-      sudo apt-get install -y jq
+      sudo apt-get install -y software-properties-common python3-pip python3-apt jq
+      #  python3 -m pip install --upgrade pip
     SHELL
   end
 
   # VM 3 Configuration
   config.vm.define "vm3" do |vm3|
-    vm3.vm.box = "hashicorp/bionic64"
+    vm3.vm.box = "ubuntu/jammy64"
 
     # Private network for inter-VM communication using DHCP
     vm3.vm.network "private_network", type: "dhcp"
@@ -86,9 +88,8 @@ Vagrant.configure("2") do |config|
 
     vm3.vm.provision "shell", inline: <<-SHELL
       sudo apt-get update
-      sudo apt-get install -y jq
+      sudo apt-get install -y software-properties-common python3-pip python3-apt jq
+      #  python3 -m pip install --upgrade pip
     SHELL
-
-
   end
 end